Severn Trent Services’ gas and leak detectors provide continuous detection of chlorine gas and sulfur dioxide gas in a normally clean air environment in up to eight distinct locations, protecting personnel and property wherever chlorine is unloaded, stored or used. Highly sensitive, the detectors monitor gas levels below U.S. OSHA requirements.
Hazardous Gas Monitor
The Capital Controls® Series 17CA3000 Chloralert™ Plus is a state-of-the-art device for rapidly measuring and alarming the ambient presence of low concentrations of toxic gases. The microprocessor-based receiver can accept in put from up to four independent sensors each designed to accurately determine part per million levels of chlorine or sulfur dioxide.
The Capital Controls® ADVANCE™ Series 1620B multipoint gas detector provides continuous detection of chlorine or sulfur dioxide gas in a normally clean air environment in up to eight (8) distinct locations. The system is designed to continuously and independently sense for the presence of gas.
The Capital Controls® ADVANCE™ Series 1610B single point gas detector provides continuous detection of chlorine or sulfur dioxide gas in a normally clean air environment.
The Capital Controls® Series T17CA4000 Chloralert™ is a low-cost, simply operated device designed to detect and provide a warning of the presence of chlorine gas in air. The detector contains a local alarm light and electrical contacts for the actuation of external alarm devices in the event chlorine is sensed.