Ballast Water Wastewater Treatment - Analyzer/Controller with Conductivity Probe

Toll Free: 1-866-646-9201 Phone: 1-215-646-9201

Products Search

Analyzer/Controller with Conductivity Probe

Contact Info:

north america- northeast
& eastern canada
joel neulight
+1(215) 997-4052
send email

north america- southeast
mitch matthews
+1(706) 255-8964
send email

north america- midwest
& middle canada
greg gaffney
+1(281) 240-6770
send email

north america- west
& western canada
bill kelly
+1(408) 309-1549
send email

latin america
carlos osorio
+(571) 677 4559
send email

middle east/africa
ghazi almani
+202 2703 2005
send email

asia pacific
bill stimeling
+1(215) 997-3754
send email

europe
luca filoni
0039 029 29 0824
send email

u.s. regions map

Specifically designed for drinking and wastewater treatment plants and swimming pool applications, the MicroChem®2 family is able to measure up to three of the following parameters: pH, ORP, Dissolved Oxygen, Chlorine, Chlorine Dioxide, Bromine, Ozone, Conductivity, 4-20 mA, Fluoride and Temperature (PT100). The MicroChem®2 family includes 4 groups of instruments: transmitter, controller, swimming pool controller, aeration basin controller.

A conductivity measuring system incorporating the EC4000 conductivity probes, the conductivity amplifier and the MicroChem2 transmitter, provides automatic measurement/control of conductivity in such systems.

The probes are suitable for mounting in the KC4000 chlorine cell (12mm diameter) or alternatively supplied in a robust housing for immersion or pipe mounting (dip).

The conductivity probes contain two electrodes across which the electrical conductivity is measured. Different conductivity ranges can be measured by using probes with different electrode surface areas.

The probes are connected to a conductivity amplifier where the signal amplified and sent as a 4 to 20mA signal to the MicroChem®2 transmitter/controller.

There are two different probe bodies: a) the 12mm diameter probe which fits into a specially designed flow cell which incorporates a built in flow indicator/regulator, and b) 25mm (1 inch) industrial housed dip probe which is fully water proof and can be used as an immersion probe or fits in low pressure pipe fittings (using a Tee piece adaptor).

Photos: